Bixpy Motor Mounts and Adaptors
Mounts for Bixpy J-2 Motor Kits
These mounts are carefully designed to be used with Bixpy motors, so they can be fitted on virtually any kayak, canoe, small boat or stand-up paddle board. Bixpy have tried to make these adaptors as simple as possible to install without making any modifications, however some solutions do require additional tools and some DIY skills. To check compatibility, installation guides and commonly asked questions the
Bixpy Support website provides a wealth of further information.
Bixpy Low Profile Pedal Drive Adaptor
The Bixpy Thru-Hull adaptor is designed to be low profile and compatible with fin-driven pedal drive kayaks, including Hobie Mirage Kayaks, Pelican HD Drive Kayaks and Vibe Kayaks with X-Drive.- Fits all roto-moulded Hobie Kayaks with Mirage Drive and the Hobie Lynx.
- Fits Vibe Kayaks using the X-Dive.
- Fits Pelican Kayaks using the HD Drive.
- Includes front guard to help protect the motor.
Price: £119.95 (RRP £169.95 - Saving £50.00)
Bixpy DIY Fin Adaptor Patch
A fin patch constructed from PVC that can be glued to the underside of most inflatable kayaks, canoes and boards. Designed to be used with the Bixpy Slide and Lock Fin Mount (Sold Separately)
- Fits on the underside of most inflatable kayaks and boards.
- Does not include Bixpy Slide and Lock Fin Adaptor (Sold Below)
- Please Note- Adhesive and Adaptor are not included.
- Also known as the Bixpy Inflatables WillFit Adaptor.
Price: £39.95
Bixpy Slide and Lock Fin Mount
A simple, easy way to attach the Bixpy J-2 motor to SUP’s with existing standard (slide and lock) fin plates, or used in conjunction with the Bixpy Fin Patch.- Fits most UK stand-up paddle boards that already have a central removable fin.
- May require a Bixpy Fin Patch (Sold Above)
- No tools required to install onto board.
- Very simple adaptor, to attach or remove a Bixpy J-2 motor to a paddle board.
Price: £49.95
Bixpy Flip and Lock Fin Mount
An easy way to mount the Bixpy J-2 Motor onto a Stand-Up Board with an existing Flip Lock removable fin. Sometimes also known as Quick Lock fins.- Fits certain stand-up paddle boards that use the Flip/Quick Lock fin system.
- Locks in the place of the boards central fin.
- No tools required to install onto board.
- Extremely quick way to attach or remove a Bixpy J-2 motor to a paddle board.
Price: £49.95
Bixpy US Fin Mount
Designed to mount a Bixpy motor onto stand-up paddle boards with a central U.S style fin box on the underside.
- Designed to fit into a standard US fin box.
- Help in place using the supplied stainless bolt and plate.
- No tools required to install onto board.
- Can be adjusted along the length of the fin box if there is room to spare.
Price: £49.95
Bixpy Universal Rudder Adaptor
A replacement rudder that can be fitted onto kayaks with an existing 10mm rudder pin housing at the stern.- 90 Degree Hinge so the rudder can be uphauled or lowered into place.
- Lock mechanism for reverse speeds.
- Kick-Up feature for shallow water or underwater obstructions.
- Uphaul, hand or foot steering controls are not supplied with this rudder blade.
Price: £169.95
Bixpy Transom Adaptor
Fit a Bixby J-2 Motor to any small watercraft that has a rear solid transom, capable of taking 32lbs of thrust.- Can be used with squared stern canoes, tenders or kayaks with transoms.
- Supplied with two different tiller lengths.
- Adjustable height, and trim settings.
- Suitable for both fresh and salt water environments.
Price: £199.95
Bixpy Flat Surface Mount
A simple to use bolt-on bracket that can be bolted or screwed onto a flat surface, such as the underside of removable tackle-pods.
- Recommended for attaching onto none structural flat surfaces, such as tackle pods.
- Not supplied with any fittings.
- Outer Dimensions: 127mm x 30mm
- Pre-drilled 4x 6mm holes within the plate.
Price: £39.95
Bixpy Pod Adaptor
Convert an existing sonar or tackle pod into a removable Bixby Motor mount. Can be fitted onto most pods or onto flat surfaces.- Motorshield to protect against collisions.
- Come supplied with all fittings and is sealed to keep the pod dry.
- Suitable for most common sonar pods.
- Distance from mounting surface to bottom of motor is 25cm.
Price: £79.95 (RRP £109.95 - Saving £30.00)
